Email:wuxichangfu@163.comWuxi Changfu Tractor Manufacturing Co.,Ltd

Wuxi Changfu Tractor Manufacturing Co.,Ltd

Master the essentials of the supporting tractor supporting rotary tiller

The walking tractor supporting rotary tiller is a cultivating machine that completes the ploughing and hoeing operations with the tractor. It has been widely used because of its strong soil-breaking ability and flat surface after ploughing. It can also be chopped and buried below the surface. The roots are easy to drill and provide a good seed bed for later seeding.


Proper use and adjustment of the supporting tractor with a rotary tiller is important to maintain its good technical condition and ensure the quality of farming. Before use, check the parts. In particular, check whether the rotary cutter is equipped with the reverse and fixing bolts and the universal joint lock pin. If the problem is found, it should be handled in time and confirmed to be safe.


When the walking tractor supports the rotary tiller to reach the predetermined speed, the unit can start and slowly lower the rotary tiller to make the rotary cutter into the soil. When the ground turning does not cut off the power, the rotary tiller shall not be lifted too high, and the transmission angle of both ends of the universal joint shall not exceed 30 degrees, and the engine speed shall be appropriately reduced. When transferring the plot or walking long distances, the power of the rotary tiller should be cut off and lifted to the highest position to lock.


The speed at which the walking tractor is equipped with the rotary tiller is also required. The dry field is preferably 2 to 3 km/h, and it is appropriate to use 5 to 7 km/h in the cultivated or raked land. Tanaka farming can be faster, but not too high.

Copyright © Wuxi Changfu Tractor Manufacturing Co.,Ltd All Rights Reserved.
QR Code