Email:wuxichangfu@163.com Wuxi Changfu Tractor Manufacturing Co.,Ltd

Wuxi Changfu Tractor Manufacturing Co.,Ltd

Main maintenance measures for hand tractor

If the mini hand tractor is not used for a long time, there will be a series of problems and malfunctions. In order to avoid the failure when it is used again, it is necessary to pay attention to the maintenance measures.

1. The parking place of the mini hand tractor is generally placed in the warehouse, but it should not be placed together with chemical fertilizers or pesticides to prevent it from corroding the parts; if parked outdoors, choose a high-lying, dry and ventilated place. And covered with a covering such as plastic cloth to prevent mechanical damage and rust.

2. Supporting parts. The tractor should be padded with wooden piers or masonry to reduce the load on the tires. If the pads are not supported, the tires should be increased by 10% to 20%, and should be inspected frequently, often inflated, and not insufficiency.

3. Wash thoroughly. Remove the dirt and oil on the exterior of the tractor, and thoroughly inspect, adjust, and tighten the parts and screws to prevent loosening.

4. Put clean oil. After the tractor is deactivated, the cooling water, diesel oil, and engine oil in the engine should be completely removed.

5. Maintenance of the machine. Take an appropriate amount of dewatering machine oil (heat the oil to about 130 °C) and pour into the intake pipe to rotate the crankshaft so that the oil adheres to the piston, piston rod, cylinder liner and valve. Shake the piston to the compression top dead center to prevent the valve spring, push rod and other parts from being pressed for a long time and lose their performance.http://www.changfutractor.com/


Copyright © Wuxi Changfu Tractor Manufacturing Co.,Ltd All Rights Reserved.
QR Code
[[Html_Custom]]