Email:wuxichangfu@163.comWuxi Changfu Tractor Manufacturing Co.,Ltd

Wuxi Changfu Tractor Manufacturing Co.,Ltd

Basic conditions for the safe use of a 15 HP walking tractor

With the development of science and technology, a variety of agricultural machinery and equipment have been widely used, which not only creates favorable conditions for agricultural production, but also provides guarantees for increasing farmers' income. It should be noted that when using a 15 horsepower walking tractor, we also need to develop good habits to ensure the safe completion of operations.


First of all, you should develop a good habit of carefully checking the 15-horsepower walking tractor before and after use. The main inspection contents are: 1. Is there any foreign body in the fuselage, whether there is oil leakage in the fuel tank, whether the water tank is leaking, and whether the oil and water are sufficient; 2. Check whether there is foreign matter in the tire, and if any foreign matter needs to be removed in time, avoid using it. Causes tire wear and even puncture; 3, check tire pressure, pay attention to summer to avoid excessive tire pressure and so on.


In addition, before and after use, we must pay attention to checking the various tools attached to the 15-horsepower walking tractor, such as pliers, wrenches, screwdrivers, jacks, etc., in case of need. For example, in the event of a tractor failure during the operation, these tools can be used for timely maintenance.


Of course, as a user, we also need to grasp some of the fault diagnosis and maintenance techniques of the 15-horsepower walking tractor. In simple terms, it is usually necessary to learn more about the identification and repair of common tractor faults so as to avoid any problems due to the temporary malfunction of the tractor. Therefore, basic identification and simple handling knowledge are essential. For example, a common problem is that the diesel engine emits blue smoke. At this time, it is necessary to check whether the piston sleeve of the cylinder sleeve is worn or whether the elasticity of the piston ring is weakened. After finding the cause, take targeted measures to solve it.


In addition, during the operation of the 15-horsepower walking tractor, the problem of automatic skipping after shifting is often encountered. In response to this problem, it is usually caused by the wear of the fork shaft groove, weakening of the fork spring, and excessive clearance of the connecting rod joint. At this time, it is necessary to timely repair the 15 horsepower walking tractor positioning slot, replace the fork spring, reduce the gap between the connecting rod joints, and ensure the normal speed change after the files are in place.

Copyright © Wuxi Changfu Tractor Manufacturing Co.,Ltd All Rights Reserved.
QR Code