Email:wuxichangfu@163.com Wuxi Changfu Tractor Manufacturing Co.,Ltd

Wuxi Changfu Tractor Manufacturing Co.,Ltd

18 knives 600mm width Rotary Cultivator’s Mechanical Adjustment and Height Increase

Left to right horizontal adjustment of the 18-knives 600mm-width rotary cultivator: Stop the walking tractor on a flat ground, making the blades 5cm off the ground. Check if the off-ground height of both left and right blades are consistent. Adjust them to ensure the operational level of knives is consistent, so that the tillage depth can be uniform.

 

Front to rear horizontal adjustment of the 18-knives 600mm-width rotary cultivator: Lower the equipment to desired depth, so that we can check whether the gimbal angle and the rotary cultivator axis are close to level. If the gimbal angel is too large, adjust the pull rod, so that the rotary cultivator can be in horizontal position.

 

Height adjustment of the 18-knives 600mm-width rotary cultivator: While in operation, the gimbal angel is no allow to be greater than 10 degrees, the turning angle on the field is not allowed to be greater than 30 degrees. So, to lift the rotary cultivator, for the position adjustment type, can screw at a appropriate position of the handle; for the height adjustment type, should pay special attention, cut the power of gimbal to increase the height.


The working part of the 18-knives 600mm-widht rotary cultivator is equipped with 2-3 helical cutters. While in use, its equipment revolves around the vertical axis, and the cutting knives break the soil into pieces. It is suitable for paddy fields, and has strong soil-breaking and pulping effect.

http://www.changfutractor.com/

Copyright © Wuxi Changfu Tractor Manufacturing Co.,Ltd All Rights Reserved.
QR Code
[[Html_Custom]]